RTS: Products: Vision

Vision Virtual Engineer

The Virtual engineer has been developed to meet almost every application including telecommunications, transport and railway systems, oil and gas exploration and water and electricity distribution.

The VE500 and VE5000 modules have the maximum number of input and output connection arrangements. Both models include configurable analogue and digital inputs and incorporate an analogue output. The digital outputs are Boolean logic configurable and the VE5000 module includes OPTO MOSFET outputs, as well as relay outputs. An optional front panel LCD allows operators to view the status of the connected equipment and set functional parameters. The Vision unit has configurable serial ports to RS232 or RS485, so micro-processor based equipment can also be monitored. The unit is very configurable with state-logic functions availible to provide complex control loops.

Vision Communication Concentrator

The Communication Concentrator is designed to facilitate the connection of numerous serial interfaces to support the monitoring and control of equipment including UPS, air conditioning, generators and security systems via embedded protocols. The serial connections enable a seamless transmission of data to the VSys management system. Each module is fitted with analogue and digital inputs and outputs to provide alarm and control facilities that enable a complete solution for complex site installations.An optional front panel LCD allows operators to view the status of the connected equipment and set functional parameters. The Vision unit has configurable serial ports to RS232 or RS485, so micro-processor based equipment can also be monitored. The unit is very configurable with state-logic functions availible to provide complex control loops.

Vision Battery Engineer

BE500 and BE5000 Battery Engineer modules enable the monitoring of your standby DC power installations and are the solution for both 24V and 48V battery installations. The Battery Engineer system is also available for the monitoring of UPS battery sets. Depending on the module selected either 2 or 6 battery strings are monitored via one module.

Solutions for battery monitoring are provided via VCell battery cell products that are installed in conjunction with either the BE500 or BE5000. Each Battery Engineer module is equipped as standard with both analogue and digital inputs and outputs to enable connection to mission critical devices and equipment enabling constant information on load status to be instantly reported.